Vertical Communications DXP - Manual (Page 37)

7.11 Setting The Volume Control
•
There are four ringer loudness levels (plus an OFF position).
Set the level as follows:
1. While your telephone is on-hook and idle, press VOLUME UP
or VOLUME DOWN once for each change in loudness that
you desire. The ringer sounds once for each change as an
example of the current setting. Your selection becomes the new
default setting and will result in your telephone ringing at that
level for all future calls (until you change the default by repeat-
ing the procedure).
NOTE: If you set the ringer to the OFF position, your telephone will
sound a short ring burst once for each call you receive at your
station while the ringer is off.
•
There are eight speaker loudness levels. Set the level for the
current call as follows:
1. While on a call and in speakerphone mode, press VOLUME
UP or VOLUME DOWN once for each change in loudness that
you desire.
•
There are at least eight handset loudness levels. Set the level
for the current call as follows:
1. While on a call and in handset mode, press VOLUME UP or
VOLUME DOWN once for each change in loudness that you
desire.
GCA70-314 Using The Other Features
Non-LCD Station User's Guide 7–7