Vertical Communications DXP - Manual (Page 41)

Programming Your Telephone
9.1 Storing Extension Numbers
And Feature Codes
•
To store extension numbers at DSS buttons,
1. Press INTERCOM.
2. Dial ✳ ✳ 3.
3. Press programmable DSS button to choose storage location.
4. Dial extension number.
5. Press next programmable button and dial another extension
number to store.
6. Repeat previous step until you finish storing numbers.
7. Press SPEAKER to end.
•
To store special-purpose feature buttons,
1. Press INTERCOM.
2. Dial ✳ ✳ 3.
3. Press programmable button to choose storage location.
4. Dial the access code for the feature.
5. Press next location button, and store next feature code.
6. Repeat previous step until you have stored all desired feature
codes,
—OR—
press SPEAKER to end.
Example: Program a group call pickup button as follows: press
INTERCOM, dial ✳ ✳ 3, press the desired programmable button, dial
# 4, and press SPEAKER.
NOTE: The feature codes appear in the Quick Reference Guide located
in the back of this manual.
9
GCA70-314 Programming Your Telephone
Non-LCD Station User's Guide 9–1