Vertical Communications DXP - Manual (Page 40)

8.2 Using LCD Messaging
You can set system-supplied messages to display at any calling LCD
speakerphone.
•
To turn on LCD messaging,
1. Press INTERCOM.
2. Dial ✳ 02.
3. Press # to clear current message if you have one stored.
4. Dial message code number (01–30).
5. Press # and then press SPEAKER to end message.
6. INTERCOM light flashes.
•
To turn off LCD messaging and your INTERCOM light,
1. Press INTERCOM.
2. Dial # 02.
•
To send an LCD message to a caller who has initiated a
SOHVA or intercom call from another LCD telephone,
1. Hear the SOHVA tone or voice announcement in your handset
or headset.
2. Press the appropriate fixed RESPONSE MESSAGE button to
send a preselected message (I Will Call Back, for example) to
the calling telephone.
Using The Messaging Feature GCA70-314
8–2 Non-LCD Station User's Guide