Bio-Rad Trans-Blot® Cell - Manual (Page 2)

Note
1. Assembly & Disassembly
To insure best performance from the Trans-Blot electrophoretic transfer cell, become
fully acquainted with these operating instructions before using the cell to transfer samples.
Bio-Rad recommends that you first read these instructions carefully. Then assemble and
disassemble the cell completely. After these preliminary steps, you should be ready to
transfer a sample.
2. Wash Cell Before Use
Bio-Rad also recommends that all Trans-Blot electrophoretic transfer cell components
and accessories be cleaned with a suitable laboratory cleaner (such as Bio-Rad Cleaning
Concentrate, catalog number 161-0722) and rinsed thoroughly with distilled water, before
use.
Warranty
Bio-Rad Laboratories warrants the Trans-Blot electrophoretic transfer cell against
defects in materials and workmanship for 1 year. If any defects occur in the instrument dur-
ing this warranty period, Bio-Rad Laboratories will repair or replace the defective parts
free. The following defects, however, are specifically excluded:
1. Defects caused by improper operation.
2. Repair or modification done by anyone other than Bio-Rad Laboratories or an authorized
agent.
3. Use of fittings or other spare parts supplied by anyone other than Bio-Rad Laboratories.
4. Damage caused by accident or misuse.
5. Damage caused by disaster.
6. Corrosion due to use of improper solvent or sample.
For any inquiry or request for repair service, contact Bio-Rad Laboratories after con-
firming the model and serial number of your instrument.
Model
Catalog Number
Date of Delivery
Warranty Period
Serial Number
Invoice Number
Purchase Order Number