Bio-Rad Model 583 Gel Drying Supports - Manual (Page 13)

APPENDIX B. SPECIFICATIONS
Vacuum
Starting > 29” Hg (23.4 Torr)
After 10 hours > 28” Hg at 22° C (48.8 Torr)
At 35° C RT > 26” Hg at start (99.6 Torr)
Flow rate
60 Hz > 28 liters per minute
50 Hz > 21 liters per minute
Fluid Capacity
Minimum (MIN) 4 liters
Maximum (MAX) 5 liters
Function Modes Continuous or timed operation
Timer Control 0 to 3 hours, fully adjustable
Operating Conditions
Temperature 4 to 35° C
Humidity 10 to 90% relative humidity
Dimensions (D x W x H) 40 x 25 x 51.1 cm
Weight (dry) 14 kg (30 lbs)
Electrical connection 3-wire power cord.
Power requirements
115 V AC models 90-140 V AC, 50/60 Hz, 6 Amps
230 V AC models 200-264 V AC, 50/60 Hz, 4 Amps
Fuses required Type T, 250 V AC
115 V AC models 8 Amp; 5 x 20 mm; slo blo (2)
230 V AC models 6.3 Amp; 5 x 20 mm; slo blo (2)
Regulatory
Certified to I.E.C. 1010/Low Voltage Directive 73/23/EEC
Certified to E.M.C. Directive 89/336/EEC (220 V only)/
EN55014 Emissions
EN50082-2 Immunity
Specifications
10