Bio-Rad Model 583 Gel Drying Supports - Manual (Page 5)

1.2 PHYSICAL DESCRIPTION
Table 1.
Front View Physical Features
Feature Description
1. Vacuum Inlet Quick disconnect valve for connecting to the gel dryer’s vacuum line.
Port
2. Vacuum Line Pre-assembled with 1/4” quick disconnect fitting and 1/4” vacuum tubing.
3. Two-way Prevents foaming when the HydroTech is operating but the gel dryer is not in use.
Valve This valve is plumbed into the vacuum line.
4. Power On/ This switch can be set for 0 to 3 hours of operation or continuous operation.
Off Timer
5. Vacuum Provides vacuum pressure indicator. This gauge is plumbed into the vacuum line.
Gauge
(optional;
not shown)
Introduction
2
HydroTech Vacuum Pump
1
4
2
3