Bio-Rad Model 583 Gel Drying Supports - Manual (Page 3)

Safety
SAFETY
Caution/Warning
No user-serviceable parts are inside. Refer servicing to Bio-Rad service
personnel.
This instrument is intended for laboratory use only.
This product conforms to the “Class A” standards for electromagnetic emissions intended for laboratory
equipment applications. It is possible that emissions from this product may interfere with some sensitive
appliances when placed nearby or in the same circuit as those appliances. The user should be aware of this
potential and take appropriate measures to avoid interference.
This instrument should not be modified or altered in any way. Alteration of this instrument will void the man-
ufacturer’s warranty, void the safety and emission certification, and create a potential safety hazard for the
user.
Bio-Rad is not responsible for any injury or damage caused by the use of this instrument for purposes other
than for which it is intended or by modifications of the instrument not performed by Bio-Rad or an authorized
agent.
1. Always connect the unit to a power receptacle using a 3 prong plug. Always use a receptacle which has
proper earth grounding and, preferably, ground fault protection.
2. Never enclose the unit in an unventilated space or closet.
3. The fluid circulated in the Hydrotech may be considered toxic and/or corrosive. Exercise appropriate
caution when handling the unit, disconnecting lines or opening the reservoir.
Note: This product conforms to EN55014 for electromagnetic emissions. It is possible that emissions from
the product may interfere with some sensitive appliances when placed nearby or on the same circuit as
these appliances. The user should be aware of this potential and take appropriate measures to avoid
interference
!