Bio-Rad Bio-Plex Software® Upgrades and Conversions - Manual (Page 85)

Protocol Window
73
To define the wells containing standards in your microtiter plate, click the
Standard button , then click or drag the wells in the template. Use the
Autofill buttons as described on page 70 to define multiple standard wells
and/or replicate groups of standards.
Figure 61. Defining a row of standard wells
NOTES:
• The cursor changes to a Standard cursor as you move it over the
template. Standard wells are marked in the template by a circle
with a number inside it.
• After you have defined the standard wells, you are ready to enter
the concentrations of the standards as described on page 91.
D EFINING C ONTROL W ELLS
Control wells contain samples of known concentration; the expected vs.
observed concentrations of the controls can be calculated at the end of the
reading.
To define the wells containing controls in your microtiter plate, click the
Control button , then click or drag the wells in the template. Use the
Autofill buttons as described on page 70 to define multiple control wells and/
or replicate sets of controls.
Figure 62. Defining a row of control wells
BioPlex_6.book Page 73 Friday, September 23, 2011 11:55 AM