Bio-Rad Bio-Plex Pro™ Human Isotyping Assays User Manual
Page 25
Advertising
23
Fig. 4. Plate formatting.
4. Click Enter Standards Info.
a. Enter the highest concentration and units of each analyte in the
top row (labeled S1) of the table. S1 concentration information is
listed in the product data sheet.
b. Enter a dilution factor of 4 and click Calculate. The concentrations
for each standard point will be populated for all analytes in the table.
c. optional: enter the lot number of the vial of standards into the
Standard Lot box and click Save.
5. Click Enter Controls Info.
a. For user-specified controls, select an analyte from the dropdown
menu, then enter a description and concentration. Repeat for
each additional analyte in the assay.
Advertising