Bio-Rad DC™ Protein Assay - Manual (Page 12)

VII. SPILL, LEAK, AND DISPOSAL PROCEDURES
SPILL RESPONSE PROCEDURES: CAUTION: Caustic material. Cover spill with adsorbent and
collect for solid waste disposal.
PREPARING WASTES FOR DISPOSAL: Comply with all applicable federal, state, and local reg-
ulations on spill reporting, waste handling, and waste disposal.
VIII. SPECIAL HANDLING INFORMATION
VENTILATION AND ENGINEERING CONTROLS: In general, dilution ventilation is a satisfactory
health hazard control for this substance.
RESPIRATORY CONTROLS: This product is a liquid and does not contain volatile organics and
should not require any special respiratory controls. Respiratory controls may be required for pro-
tection against other chemicals being used in the same area.
EYE PROTECTION: Use chemical safety goggles. Contact lenses should not be worn when
working with this material. Maintain eye wash fountain and quick-drench facilities in work area.
GLOVES: Chemical resistant gloves such as neoprene.
OTHER CLOTHING AND EQUIPMENT: Lab coat or apron.
WORK PRACTICES, HYGIENIC PRACTICES: Use good laboratory practices. Wash hands after
using and before eating. Do not eat, drink, or smoke in the work area.
OTHER HANDLING AND STORAGE REQUIREMENTS: Keep in a tightly closed container to
protect product quality. Store in a cool, dry, ventilated area.
PROTECTIVE MEASURES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT:
Protective clothing, eyewear and appropriate NIOSH-approved respiratory protection should be
worn.
We believe that the information contained herein is current as of the date of this Material Safety
Data Sheet. Since the use of this information and conditions of use of the product are not within
the control of Bio-Rad, it is the user’s responsibility to handle the product under conditions of safe
use.
10
LIT448D 7/21/98 1:16 PM Page 10