Bio-Rad DC™ Protein Assay User Manual
Page 18
VII. SPILL, LEAK, AND DISPOSAL PROCEDURES
SPILL RESPONSE PROCEDURES:
Caution, may be slippery. Small spill may be cleaned up
with a sponge and water washed down the drain.
PREPARING WASTES FOR DISPOSAL:
Comply with all applicable federal, state, and local reg-
ulations on spill reporting waste handling, and waste disposal.
VIII. SPECIAL HANDLING INFORMATION
VENTILATION AND ENGINEERING CONTROLS:
In general, good ventilation is sufficient.
However, if conditions of use create discomfort to the worker a local exhaust system should be
considered.
RESPIRATORY CONTROLS:
Should not be required for this product.
EYE PROTECTION:
Chemical safety goggles.
GLOVES:
Use chemical resistant gloves such as neoprene.
OTHER CLOTHING AND EQUIPMENT:
Wear lab coat or apron.
WORK PRACTICES, HYGIENIC PRACTICES:
Use good laboratory practices. Wash hands after
using and before eating. Do not eat, drink, or smoke in the work area.
OTHER HANDLING AND STORAGE REQUIREMENTS:
Keep tightly sealed to protect quality.
Store in a cool, dry, well-ventilated place away from incompatible materials.
PROTECTIVE MEASURES DURING MAINTENANCE OF CONTAMINATED EQUIPMENT:
Proper protective clothing, eye protection, and respiratory equipment should be worn.
We believe that the information contained herein is current as of the date of this Material Safety
Data Sheet. Since the use of this information and conditions of use of the product are not within
the control of Bio-Rad, it is the user’s responsibility to handle the product under conditions of safe
use.
16
LIT448D 7/21/98 1:16 PM Page 16