Dell OptiPlex 745 User Manual
Page 48
7.
Replace the floppy drive and optical drive.
8.
Check all connectors to be certain that they are properly cabled and firmly seated.
9.
Replace the computer cover (see
Replacing the Computer Cover
).
10.
If the drive you just installed is the primary drive, insert a bootable medium into your boot drive.
11.
Turn on the computer.
12.
Enter system setup and update the appropriate Primary Drive option (0 or 2) (see
Entering System Setup
).
13.
Exit system setup, and reboot the computer.
14.
Partition and logically format your drive before you proceed to the next step.
For instructions, see the documentation that came with your operating system.
15.
Test the hard drive by running the Dell Diagnostics (see
Dell Diagnostics
).
16.
Install your operating system on the hard drive.
For instructions, see the documentation that came with your operating system.
Back to Contents Page