HONDA 2008 honda civic - Manual (Page 255)

Remove the socket by turning it
one-quarter turn counterclockwise. Open the trunk, and remove the
socket from the light assembly by
turning it one-quarter turn counter-
clockwise.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Reinstall the socket. Turn it
clockwise until it locks. Make sure
the new bulb is working.
Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.
Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.
Test the lights to make sure the
new bulb is working.
Put the fasteners into the holes on
the trunk lid trim. Reinstall the
screws.
Push the trunk lid trim back into
position.
2.
1.
3.
4.
5.
6.
7.
8.
3.
On all EX-L, Canadian LX, EX, and
Si models
Lights
Replacing a High-mount Brake
Light Bulb
Ma
int
e
na
nce
249
BULB
SOCKET
BULB
SOCKET
０７／０７／０３ ２１：１５：４１ ３１ＳＮＡ６２０ ０２５４