Brake system indicator – HONDA 2008 honda civic User Manual

Page 285

Advertising
background image

However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system’s dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down, and
you will have to press harder on the
pedal.

Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see

on page

).

If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.

If the ABS indicator comes on with
the brake system indicator, have
your vehicle inspected by your
dealer immediately.

The brake system indicator normally
comes on when you turn the ignition
switch to the ON (II) position and as
a reminder to check the parking
brake. It will stay on if you do not
fully release the parking brake.

If the brake system indicator comes
on while driving, the brake fluid level
is probably low. Press lightly on the
brake pedal to see if it feels normal.
If it does, check the brake fluid level
the next time you stop at a service
station (see page

).

If the fluid level is low, take your
vehicle to a dealer, and have the
brake system inspected for leaks or
worn brake pads.

286

242

Emergency

Towing

Brake System Indicator

T

a

k

ing
Ca
re

of
th

e

U

ne
x

p

e

c

te

d

279

Canada

U.S.

07/07/03 21:19:56 31SNA620 0284 

Advertising