HONDA 2008 honda civic - Manual (Page 89)

CONTINUED
The auto door unlocking feature has
five possible settings:
Make sure the shift lever is in the
Park (P) position (A/T vehicles).
Turn the ignition switch to the ON
(II) position, and make sure to
close the driver’s door.
All doors unlock when you move
the shift lever to the Park (P)
position (A/T vehicles).
This is the default setting.
the driver’s door
unlocks when you move the shift
lever to the Park (P) position.
The auto door unlocking is
deactivated all the time.
Turn the ignition switch to the
LOCK (0) position.
Release the switch, and within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
move the shift
lever to the Park (P) position.
Push and hold the front of the
master door lock switch on the
driver’s door. You will hear a click.
Keep holding the switch until you
hear another click (after about 5
seconds).
push and hold the
brake pedal, and move the shift
lever out of the Park (P) position.
1.
2.
3.
4.
5.
6.
Locks all doors when the vehicle’s speed
reaches about 9 mph (15 km/h).
On A/T vehicles,
On A/T vehicles,
On A/T vehicles,
Door Locks
To program the Drive Lock mode: Auto Door Unlocking
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
83
A/T models
０７／０７／０３ ２０：５２：５６ ３１ＳＮＡ６２０ ００８８