Stage 2: connecting the camera to the printer, Stage 3: printing – Sony DSLR-A100 User Manual
Page 124
124
1
Connect the camera to the
printer.
2
Turn on your camera and the
printer.
The following screen appears.
• If the screen does not appear, press the
shutter button on the camera halfway down.
1
Select the image to print with b/B
on the controller.
• When you want to print only one image, go
to step 4.
2
Select the number of sheets with
v/V on the controller.
• The number increases up to 20 with v and
decreases with V.
• You can select the number of sheets for all
the images at the same time (page 125).
3
Repeat steps 1 and 2 if you want
to print other images.
• If you display other images, the total
number of sheets is indicated in the “Total”
field.
• You can switch between the single-image
display and the index display with the
(Display) button.
• You can enlarge the image with the
(Enlarge) button.
Stage 2: Connecting the camera
to the printer
1
To the
USB jack
2
To the USB
jack
USB cable
Stage 3: Printing