Sony DSLR-A100 - Manual (Page 87)

87
Re
co
rd
in
g men
u
For details on the operation 1 page 80
The order in bracket shooting (page 62) can be selected. The order is common to both ambient
light bracket and flash light bracket.
• This does not apply to white balance bracket.
You can reset the main functions of the recording mode.
1 Select [Enter] in [ Reset].
The message “Reset recording mode?” appears on the LCD monitor.
2 Select [Yes] with b on the controller, then press the center of the controller.
The main functions of the recording mode are reset.
• For details on the items to be reset, see “Reset default” (page 151).
Autoflash When the mode dial is set to AUTO, P, or Scene Selection,
and the flash is pulled up, the flash fires automatically only
when the flash is necessary.
Fill-flash When the mode dial is set to AUTO, P, or Scene Selection,
and the flash is pulled up, the flash fires every time.
Bracket order
0 t – t + Use 0Ev in shooting the first picture which presents the best
shooting opportunity.
Example: 0Ev
t – 0.3Ev t +0.3Ev
–
t
0
t
+ Ordered from low to high exposure.
Example:
– 0.7Ev t 0Ev t +0.7Ev
Reset