Sony DSLR-A100 - Manual (Page 125)

125
P
rin
ti
ng
im
ag
es
4
Press the center of the controller.
The print confirmation screen appears.
5
Press the center of the controller
again.
The image is printed.
6
After the message “Printing
finished.” appears, press the
center of the controller.
To cancel the print
During printing, pressing the center of the
controller cancels the print. Remove the
USB cable or turn off the camera. When
you want to print again, follow the
procedure above.
To set up using the print menu
After you connect the camera to a printer,
pressing the MENU button opens the
following print menu. To operate the print
menu, see page 80.
1 (Page 1)
[Batch print]
• You can specify the number of prints up to 20.
[Index print]
• For an index print, the number of images on one
sheet, or the print format used depends on your
printer.
All images Prints all the images in the
recording medium in equal
quantities.
Reset Clears all the print settings.
Start Prints all the images in the
recording medium as an index
print. The print confirmation
screen appears. Pressing the
center of the controller starts
the printing operation.