Canon A-1 User Manual

Page 96

Advertising
background image

Proper Care of the Camera

Your A-1 is a rugged, high-quality camera. It

will work properly if operated and cared for

properly. Never force anything. If you have

a problem that is not answered in the in-

structions below, follow the advice of your

nearest Canon serviceman. We recommend

taking the A-1 to an authorized Canon

service facility at least once every three years

for a complete checkup.

Storage

The best thing you can do for your A-1 is to

use it regularly, but in the event that it

won't be used for quite a while, first remove

it from any camera bag or soft case. Then

remove the battery to prevent possible cor-

rosion to the terminals. Recap the lens, and

if the body is stored separately from the

lens, put the body cap and the rear lens cap

on. Wrap it in a clean, soft cloth along with

silica gel or some other desiccant to keep it

dry, and store it in a cool, dry, dust-free

place. Avoid storing it in the rear window,

glove compartment or other “hot spots” of

an automobile, in a place such as a labora-

tory where chemicals could cause corrosion

and rust, or in a dusty, damp, or hot place.

Keep it out of direct sunlight. Before using

the A-1 after it has been stored for a long

time, carefully check the operation of each

part.

Cleaning the Camera and Lens

Before doing anything else, clean the camera

with a blower brush. It is best to have two

blower brushes, one for the camera body

and the lens barrel, the other for the lens

surfaces, eyepiece and mirror. If the blower

brush is sufficient to get the camera clean,

stop there. By all means, avoid touching the

lens. Should you accidentally get finger-

prints or smudges on the lens or eyepiece,

use lens tissue (not eyeglass tissue!) or a

clean, soft, untreated cloth, after breathing

on the lens surface, if necessary. Never use a

handkerchief, facial tissue or any other cloth

which might permanently scratch the lens,

and never use a cloth treated with a chemical

which might totally ruin the lens coating.

Put only one or two drops of lens cleaning

fluid on the tissue, not the lens, and, starting

at the center of the lens, lightly wipe it while

working towards the outer edges in a circular

motion. Use a silicon cloth, if necessary, to

wipe smudges off the camera body and lens

barrel only. The mirror is another part you

should never touch. A dirty mirror does not

affect the image though it may impair

viewing. If it is dusty, clean it very gently

with the lens blower brush. If more cleaning

Not For Resale – Free Download at http://www.joe-chan.com/manuals

–95–

Advertising