Aintenance and care, Replacing the post-motor hepa media filter – Bissell 60A4 User Manual

Page 11

Advertising
background image

11

w w w . b i s s e l l . c o m

M

aintenance and care

the post-motor HEPA media filter assists in

the filtration process to return clean air to

the room.

1. Unplug the vacuum from electrical outlet.

2. Remove the filter door (located on the back

of the vacuum) by pulling down on the filter

door and pulling it toward you.

3. Remove the post-motor HEPA media filter by

grasping the lip of the filter frame and

pulling out toward you.

4. Replace the post-motor HEPA media filter

with a new filter.

notE: the post-motor filter is a white,

pleated HEPA media filter. this filter is not

washable and must be replaced when it

becomes dirty.

5. Replace the filter door by inserting the two

tabs at the bottom of the filter door, pushing

down on the bottom of the filter door and

pushing it back into the vacuum.

IMPoRtAnt: Make sure the dirt cup is

empty before you replace or clean these

filters.

1. To remove the dirt cup HEPA filter, pull down

on the front snap.

2. Remove and replace as necessary.

notE: the dirt cup HEPA media filter is a

white, pleated HEPA media filter. this filter

is not washable and must be replaced

when it becomes dirty.

Replacing the post-motor HEPA media filter

Post-Motor

HEPA Media Filter

2.

3.

1.

Replacing the dirt cup HEPA media filter & cleaning the foam filter

Advertising