Bissell 4757e - Manual (Page 10)

5. Crack or hole in hose 5. Check hose and replace if needed
6. Air flow regulator is set to open or minimum setting 6. Change to closed or maximum setting
7. Clog in the dirt cup 7. Clear clog from dirt cup following
instructions above
Visible dust escaping from vacuum
Possible cause Remedy
1. Dirt cup is full 1. empty dirt cup
2. Filters missing 2. Check all filters for correct installation
3. Filters are dirty 3. Check and clean or replace all filters
4. hose is blocked 4. Remove hose and check for blockages
5. hose connector not securely attached to 5. make sure hose connector is locked
suction inlet into suction inlet
6. Crack or hole in hose 6. Check hose and replace if needed
other maintenance or service not included in the manual should be
performed by an authorized service representative.
thank you for selecting a bissell product
w w w. b i s s e l l . c o m
R
eplacement parts
10
T
roubleshooting
Please do not return this product to the store.
Item Part No. Part Name
1 203-1771 Dirt Cup Filter screen
2 203-1772 Dirt Cup Filter
3 203-1786 Post-motor Filter
4 203-1773 Floor Nozzle
5 203-1537 hose with handle
6 203-1538 extension Wands (2)
7 203-1539 Combination Crevice Tool/Dusting Brush
8 203-1290 Wide Pet TurboBrush™ Tool
1
5
2
6
3
7
4
8