Notice, Warning, Aintenance and care – Bissell 4757e User Manual

Page 8

Advertising
background image

w w w. b i s s e l l . c o m

M

aintenance and care

8

8. Insert the dirt cup filter assembly back into

the dirt cup by lining up the tabs on the top

of the dirt cup filter assembly with the notch-

es inside the top of the dirt cup and turning

the handle on the bottom of the dirt cup

filter assembly clockwise to lock into place.

Replacing the post-motor filter

the post-motor filter assists in the

filtration process to return cleaner air to

the room. use only bissell replacement

filters in your cleanView Pet compact.
1.
Unplug the vacuum from electrical outlet.
2. Remove the filter door (located on the back

of the vacuum) by pushing down on the tab

and pulling out and away from the vacuum.

3. The post-motor filter can be hand washed

in cold water with a mild detergent. Rinse

well and air dry thoroughly before placing

back into the vacuum.

4. Replace the filter door by placing the tabs

on the bottom of the filter door into the

notches on the bottom of the post-motor filter

compartment and pushing the tab forward

back into the vacuum to lock into place.

clearing clogs from the dirt cup

1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum, following

steps 1-3 of emptying the dirt cup on page 6.

3. Remove the dirt cup filter assembly from the

dirt cup, following step 2 of Clean the dirt

cup filter on page 7.

cleaning the dirt cup filter continued

notice:

This product is intended for household use

only and not for commercial or industrial

use. Vacuuming of dust from products like

plaster, concrete or ashes will damage the

motor and void the warranty.

Tip:

For maximum cleaning performance,

check the filters often and clean or

replace if necessary.

WaRning:

Do not operate cleaner with

damp or wet filters or without

all filters in place.

2.

Advertising