Dustless Dustie DA User Manual

Installation instructions

Advertising
background image

3

Slip the collar over the neck of the RO/

DA sander/grinder and tighten the band

clamp using a philips screwdriver. Posi-

tion the vacuum port underneith the air

hose connector.

2

Begin installation by slipping the band clamp

over the Dustie RO/DA collar.

1

The Dustie RO/DA dust shroud comes with

a flexible dust shroud and band clamp. It fits

most popular makes and models of RO and

DA sanders/grinders.

Installation Instructions

DUST COLLECTION SYSTEM FOR RO/DA Sanders/Grinders

6

Inset the 18 inch convertor hose into the

port of the Dustie.

5

Hand tighten the pad using the spanner

wrench.

4

Use a spanner wrench to hold the arbor in

place while installing the pad.

7

Connect the other end of the 18 inch con-

verter hose to the main hose of the vacuum.

1285 East 650 South

Price, Utah 84501

p

435.637.5885

f

435.637.5895

www.dustlesstools.com

Manual072010

Advertising
This manual is related to the following products: