Pro-aim positioning and locking the adam – Edge Lighting Adam Pro Aim MR16 User Manual
Page 4
Advertising
4
Pro-Aim Positioning and Locking the Adam
N
1
position by tightening the bottom M4 set screw with the
2mm Allen driver.
: Rotate the Adam to the desired location and lock the
O
2MM ALLEN DRIVER
2: Use the 2mm Allen driver on the bottom of the Adam arm to
tilt the head up or down.
2MM ALLEN
DRIVER
2
BOTTOM M4
SET SCREW
P
3
front of the shade to rotate the lens to the desired position.
Tighten the M4 set screw to lock the lens in position.
: Place the 2mm Allen driver into the M4 set screw on the
3
SHADE
1
2MM ALLEN DRIVER
Advertising