Edge Lighting 7" Fast Jack Canopies - Manual

SAVE THESE INSTRUCTIONS!
FJP-12RD-3-_
- This product is ETL listed for indoor dry locations.
- This product is dimmable with a standard incandescent
dimmer.
- This product can be installed to a 4" electrical box with
round plaster ring, or to an octagon electrical box.
A
1: Loosen and remove the three #8-32 screws from the canopy
to remove the mounting plate.
Installation Instructions for 12" Round 3 Port Fast Jack Canopy
Install the Canopy
1
904-FJP-12RD-3-02
IMPORTANT INFORMATION
1718 W. Fullerton Ave
Chicago, IL 60614
Tel: 773-770-1195
Fax: 773-935-5613
www.edgelighting.com
[email protected]
#8-32 SCREW
1 1
MOUNTING PLATE
CANOPY
MOUNTING
PLATE
ELECTRICAL BOX
2
B
2:
with local electrical codes.
3: Mount the mounting plate to the electrical box with the two
#8-32 screws provided.
Make sure the mounting plate is grounded in accordance
#8-32
SCREW
3 3
2
© 2009 Edge Lighting. All Rights Reserved.