Edge Lighting 7" Fast Jack Canopies User Manual
Page 2
Advertising
D
ELECTRICAL BOX
CANOPY
6: Place all the wires and wire nut connections inside the
canopy.
7: Align and secure the canopy to the mounting plate by
tightening the three #8-32 screws.
8:
the Fast Jack canopy connector.
Use fingers to tighten the Fast Jack fixture connector into
CAUTION: Risk of Fire:
MAX load of each Fast Jack canopy
connector is 75 watt.
FAST JACK
FIXTURE
CONNECTOR
2
C
4: Connect the white fixture wire to the neutral power wire with
a wire nut.
5: Connect the black fixture wire to the hot power wire with a
wire nut.
4
5
#8-32
SCREWS
7
7
E
8
8
FAST JACK
CANOPY
CONNECTOR
8
Advertising
This manual is related to the following products: