Edge Lighting Surface Mount Fast Jack Canopies - Manual (Page 2)

C
6:
electrical codes.
7: Mount the crossbar to the electrical box with the two #8-32
screws provided.
Make sure the crossbar is grounded in accordance with local
#8-32 SCREW
CROSSBAR
ELECTRICAL BOX
7
7
D
ELECTRICAL BOX
8
8
8: Connect each canopy wire to one LED power supply low
voltage wire with a wire nut.
9: Place all wires inside the canopy.
6
CANOPY
9
E
ELECTRICAL BOX
CANOPY
#8-32 FLAT
HEAD SCREWS
10: Align and secure the canopy to the crossbar by tightening
the two provided #8-32 flat head screws.
10 10
F
CANOPY
11:
the Fast Jack canopy connector. Use fingers to tighten the Fast Jack fixture connector into
11
FAST JACK CANOPY
CONNECTOR
FAST JACK FIXTURE
CONNECTOR
2
CAUTION: Risk of Fire: MAX load of Fast Jack LED canopy is
60 watt.