Edge Lighting Vessel 10 Glass - Manual (Page 3)

ELECTRICAL
BOX
3
K
CORD
SOCKET
I 13:
14: Connect the fixture white wire to the neutral power wire
with a wire nut.
15: Connect the fixture black wire to the hot power wire with
a wire nut.
Make sure that the canopy is grounded in accordance
with local electrical codes.
14
15
ELECTRICAL
BOX
J
16:
17: Slide the canopy up onto the crossbar assembly and
secure it in place by tightening the threaded cap to the
crossbar rods.
Place all wires and wire nut connections inside the
electrical box.
13
CANOPY
CANOPY
THREADED
CAP
18: Screw the lamp completely into the socket.
CAUTION: To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
LAMP
18
16
17
Use MAX 100 Watt, bulb type A19, E26 base lamp.