Install drywall, trim & lamp – Edge Lighting Sun3C Ceiling LED Downlight Components - Indoor/Outdoor User Manual
Page 3
Install Drywall, Trim & Lamp
H
2
2 7/8"
1: Mark a point on the drywall where the housing opening is
going to be located.
2: Cut out the marked drywall location with a 2-7/8"metal hole
saw bit (refer to www.greenlee.com cat# 825-2-7/8).
3
TRIM
4: Connect each trim wire (either one) to one power wire in the
electrical box with a wire nut.
5: Place all wires inside the housing and gently push the trim
completely into the housing opening by squeezing the spring
clips.
NOTE:
Each fixture contains an integrated LED lamp. Each Sun 3
consumes 10 watts.
4
4
SPRING CLIP
Overall Wiring Diagram
SUN 3
700mA
120V NEUTRAL (WHITE)
120V HOT (BLACK)
15W
POWER SUPPLY
1
J
5
3:
lign the tether
terminal to the trim tab and secure it by replacing the Phillips
screw.
After installing drywall and finishing it, a
I
TRIM
3
TETHER
SCREW
SPRING CLIP
-
-
+
+