FASS FA F16 220G - Manual (Page 11)

Some of the photo’s are of a different application, procedures are the same.
A. Insert PFB-2001C in to bed channel align the nut with the opening on the channel.
.
B. Secure PFB-2002 and RS-2001 with (1) hex bolt 1/2” -20 x 1 1/2” and (1) 1/2” washer to FPB-2005
C. Secure THB-1001 to bolt on bracket with the RS-1002 and the (5)-1/4-20x1 bolts, 1/4 washers, and
1/4 nuts. With the (4)-1/4-20x 1.75” bolts thread the BHB-10001 to the THB-1001.
Note: Use of Anti-seize compound is highly recommended.