Canon A710 IS - Manual (Page 36)

34
*1 Only [Grid Lines] can be set.
You can display vertical and horizontal grid lines, a 3:2 print area
guide, or both on the LCD monitor while shooting to help check the
position of your subject.
*2 Images are still recorded at the standard aspect ratio of 4:3.
Setting the Display Overlays
Shooting Mode
Grid Lines
Displays grid lines to divide the screen into 9 parts.
Helps confirm the vertical and horizontal positioning of
the subject.
3:2 Guide
Helps confirm the print area for a 3:2 print.* 2
Areas outside the printable area are grayed out.
Both
Displays both the grid lines and the 3:2 guide
simultaneously.
1
(Rec.) Menu [DISP. Overlay] [Off]*/
[Grid Lines]/[3:2 Guide]/[Both].
See Menus and Settings (p. 19) .
* Default setting.
The grid lines and 3:2 guide will not be recorded in the image.
* 1