Canon A710 IS - Manual (Page 98)

96
“!” displayed on the LCD monitor in red and
shooting automatically stopped.
There is insufficient free
space in the camera’s built-
in memory. z Try the following procedures.
- Format the card with a low level
format before shooting (p. 26)
- Lower the recording pixels or the
frame rate (p. 37)
- Use a high-speed memory card
(SDC-512MSH, etc.)
Zoom does not operate.
Zoom lever was pressed
while shooting in movie
mode. z Operate the zoom before shooting
in movie mode (Basic Guide
p. 12). Note the digital zoom is
available while shooting, but only
in Standard movie mode.
Playback
Cannot play back.
You attempted to play back
images shot with another
camera or images edited
with a computer. z Computer images that cannot be
played back will play back if they
are added to the camera using the
supplied software program
ZoomBrowser EX or
ImageBrowser.
File name was changed with
a computer or file location
was changed. z Set the file name or location on the
file format/structure of the camera.
(Refer to the Software Starter
Guide for details).
Movies cannot be edited.
Some movies shot with another camera cannot be edited.