Canon A710 IS - Manual (Page 90)

88
Viewing Images on a TV set
You can shoot or play back images on a television with the supplied AV cable.
1
Turn off the camera and the TV.
2
Connect the AV cable to the camera’s A/V
OUT terminal.
z Open the terminal cover by slipping a
fingernail under the right edge and
plug the AV cable in all the way.
3
Plug the other ends of the
AV cable to the VIDEO IN
and AUDIO IN jacks on the
TV.
4
Turn on the TV and switch it to video mode.
5
Turn on the camera.
The video output signal can be switched (NTSC or PAL) to
accommodate different regional standards
(p. 23) . The default
setting varies between regions.
If the video system is set incorrectly, the camera output may
not display properly.
VIDEO
AUDIO
Yellow
Black
- NTSC: Japan, U.S.A., Canada, Taiwan and others
- PAL: Europe, Asia (excluding Taiwan), Oceania and others