FORD 2013 Taurus v.3 - Manual (Page 174)

To install a filter:
1. First, position the filter in its
housing making sure that the far
forward end is all the way up in the
housing.
2. Push in on the center of the
outside edge of the filter and rotate
up into the housing until it clips
into position.
REAR SEATS
Split-folding Rear Seat
WARNING: Before returning the seat back to its original position,
make sure that cargo or any objects are not trapped behind the
seat back. After returning the seat back to its original position, pull on the
seat back to make sure that it has fully latched. An unlatched seat may
become dangerous in the event of a sudden stop or crash .
You can fold one or both rear seat backs.
• Lower: Pull the strap located on the
outboard side of the seat back to
release it, and then fold seat back
down.
• Raise: Pull up on the seat and push it
back until you hear it latch into place.
Seats 173
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)