Driving on snow and ice, All-wheel drive (if equipped) 209 – FORD 2013 Taurus v.3 User Manual

Page 210

Advertising
background image

Apply just enough power to the wheels to climb the hill. Too much power
will cause the tires to slip, spin or lose traction, resulting in loss of vehicle
control.

Descend a hill in the same gear you
would use to climb up the hill to
avoid excessive brake application and
brake overheating. Do not descend in
neutral; instead, disengage overdrive
or manually shift to a lower gear.
When descending a steep hill, avoid
sudden hard braking as you could
lose control. The front wheels have
to be turning in order to steer the
vehicle.

Your vehicle has anti-lock brakes, therefore apply the brakes steadily.
Do not “pump” the brakes.

Driving on Snow and Ice

WARNING: If you are driving in slippery conditions that require
tire chains or cables, then it is critical that you drive cautiously.

Keep speeds down, allow for longer stopping distances and avoid
aggressive steering to reduce the chances of a loss of vehicle control
which can lead to serious injury or death. If the rear end of the vehicle
slides while cornering, steer in the direction of the slide until you
regain control of the vehicle.

Note: Excessive tire slippage can cause transmission damage.

AWD vehicles have advantages over 2WD vehicles in snow and ice but
can skid like any other vehicle.

Should you start to slide while driving on snowy or icy roads, turn the
steering wheel in the direction of the slide until you regain control.

Avoid sudden applications of power and quick changes of direction on
snow and ice. Apply the accelerator slowly and steadily when starting
from a full stop.

All-Wheel Drive (If Equipped)

209

2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA
(fus)

Advertising