Canon ImageCLASS MF8180c - Manual (Page 11)

- 11 -
DRPD:
To distinguish between fax and voice calls by
using Distinctive Ring Pattern Detection.
NOTE
● The DRPD mode requires subscription to a DRPD
service. For more information, contact your local
telephone company.
Congratulations! You have now completed the machine setup.
Where to go from here...
Once you have completed all steps in this document, see the next chapter “Printing, PC Faxing,
Scanning, and Networking” to set up the machine for use in a network and to install driver software.
• For basic operations of all functions of your machine, see the Basic Guide.
• For details on sending and receiving faxes, see the Facsimile Guide.
• For information on the driver software, see the Software Guide (included in the User Software CD).
• For details on the network function of the machine, see the Network Guide (included in the User
Software CD).
• For information on remotely monitoring and controlling machine functions through a network, see
the Remote UI Guide (included in the User Software CD).
NOTE
• Remember to register your machine to ensure product support. The serial number is located on the back of the machine.
Manual:
When an extension telephone is connected to the
machine, you can receive faxes by pressing [B&W
Start] before hanging up the extension telephone.
4 Press or (arrow keys) to select
<2.USER SETTINGS>
➝ press [Set].
5 Press or (arrow keys) to select <1.TEL
LINE SETTINGS>
➝ press [Set].
6 Press or (arrow keys) to select <1.UNIT
TEL NUMBER>
➝ press [Set].
7 Enter your fax number using the numeric keys
➝ press [Set].
8 Press or (arrow keys) to select <2.TEL
LINE TYPE>
➝ press [Set].
9 Press or (arrow keys) to select
<TOUCH TONE> or <ROTARY PULSE>
➝
press [Set].
10Press [Menu] to go back one level
➝
or
(arrow keys) to select <2.UNIT NAME>
➝
press [Set].
11Enter the unit name using the numeric keys
max. 24 characters, including spaces
➝ press
[Set].
NOTE
● For details on how to input characters, see P 2-1,
“Guidelines for Entering Numbers, Letters, and
Symbols,“ in the Facsimile Guide.
12Press [Stop/Reset] to return to the standby
display.