Canon ImageCLASS MF8180c - Manual (Page 12)

- 12 -
Chapter 2 : Printing, PC Faxing, Scanning, and Networking
Installation Options:
To use the machine as a local printer via USB connection, proceed to .
NOTE
• The scan function is only available through the USB connection.
To use the machine as a network printer, proceed to .
To Use the Machine as a Local Printer (USB Connection).
IMPORTANT
• DO NOT connect the USB cable before installing the software. If you connect the USB cable before installing
the software and the Found New Hardware Wizard screen appears, click [Cancel] and disconnect the USB
cable.
NOTE
• For Windows 2000/XP, log on as Administrator to install the software.
• The screenshots below are from Windows XP. However, the installation procedure is essentially the same for other
versions of Windows.
1 Turn on your computer.
2 Quit any open applications, including virus checking
software.
3 Insert the CD-ROM into your CD-ROM drive.
NOTE
● If the [MF8100 Series CD-ROM Setup] screen is not displayed, on the
Windows desktop, click [start]
➝ [My Computer] (Windows 98/Me/
2000: double-click [My Computer]). Open the CD-ROM icon
➝
double-click [Minst (Minst.exe)].
If you are installing from a copy saved on a network or hard disk,
double-click [Minst (Minst.exe)] in the copy.
4 Click [Easy Installation].
NOTE
● When you select [Easy Installation], Printer Driver and Online
Manuals will be installed. If you do not want to install both items,
select [Custom Installation].