Canon ImageCLASS MF8180c - Manual (Page 8)

- 8 -
Load paper.
13Close the cartridge cover and wait for the
cartridge cradle to rotate and stop, and then
open the cover again. Allow approximately
two seconds for the cartridge cradle to
rotate to the next receptacle.
The receptacles appear in this order:
Y ellow
> M agenta > C yan > BlacK.
15Close the cartridge cover and lower the
scanning platform. The LCD flashes PLEASE
WAIT until calibration is complete. Please
allow a few minutes for the machine to
calibrate itself.
14Repeat steps 8 to 13 until all four toner
cartridges are installed.
● For each cartridge, match the color marking on the
cartridge receptacle in the machine to the color
marking on the cartridge itself.
1 Grasp paper cassette, pull it out completely,
and set it aside.
2 Turn and pull out the shipping material, and
press the inner plate to set it on the bottom.
NOTE
● If the cartridge cover is closed during those steps or
the spent toner cartridge is not in the replacement
position, close the cover, then open it again when the
whirring sound stops. Repeat this process until the
cartridge you want to replace is in the correct
position.