NISSAN 2012 370Z Roadster - Owner's Manual User Manual

Page 303

Advertising
background image

the engine speed lowers to the target
engine speed.
Rapid clutch engagement before the engine
speed lowers to the target engine speed
may cause shift shock.

. When depressing the clutch pedal with

the gear engaged:

The engine speed is automatically kept at
the proper engine speed for the engaged
gear.
This function will not operate when low (1st)
gear is selected.
There is a delay between the clutch pedal
operation and the S-MODE operation. Make
sure the engine speed is adjusted before
engaging the clutch again.

SSD0832

Upshift indicator

The up-shift indicator is located in the tach-
ometer and shows the driver the timing to shift
into a higher gear by illuminating. The use of the
up-shift indicator will help you to upshift at a
constant engine speed from any gear.

The up-shift indicator will start flashing when the
engine speed reaches about 500 rpm before the
set figure while driving, and then illuminate after
the engine speed reaches the set figure.

The engine speed for upshifting can be set on
the vehicle information display. See “Trip com-
puter” (P.2-22).

There may be a slight difference between
the timing of the up-shift indicator illumi-
nation and the tachometer indication.

Suggested up-shift speeds

Shown below are suggested vehicle speeds for
shifting into a higher gear. These suggestions
relate to fuel economy and vehicle performance.
Actual up-shift speeds will vary according to
road conditions, the weather and individual
driving habits.

For normal acceleration in low altitude areas
[less than 4,000 ft (1,219 m)]:

Gear change

MPH (km/h)

1st to 2nd

8 (13)

2nd to 3rd

16 (26)

3rd to 4th

25 (40)

4th to 5th

28 (45)

5th to 6th

33 (53)

Starting and driving

5-19

Advertising
This manual is related to the following products: