Fm-am-sat radio with compact disc (cd) player -52 – NISSAN 2015 370Z Roadster - Owner's Manual User Manual

Page 211

Advertising
background image

4-52

Center display, heater, air conditioner, audio, phone and voice recognition systems

FM-AM-SAT RADIO WITH COMPACT
DISC (CD) PLAYER

For all operation precautions, see “Audio opera-
tion precautions” (P.4-31).

The satellite radio mode requires an active
SiriusXM Satellite Radio subscription. The sa-
tellite radio is not available in Alaska, Hawaii and
Guam.

It may take some time to receive the activation
signal after subscribing the SiriusXM Satellite
Radio. After receiving the activation signal, an
available channel list will be automatically
updated in the radio. Push the ignition switch
from LOCK to ACC to update the channel list.

Audio main operation

Head unit:

The auto loudness circuit enhances the low and
high frequency ranges automatically in both
radio reception and CD playback.

ON·OFF/Volume control:

Push the ignition switch to the ACC or ON
position, and then push the ON·OFF button
while the system is off to turn on the last audio
source, which was playing immediately before
the system was turned off. While the system is
on, pushing the ON·OFF button turns the system
off.

Turn the VOL control knob to adjust the volume.

Adjusting tone quality and speaker bal-
ance:

To adjust Bass, Treble, Balance and Fade, push
the Audio control knob. When the display shows
the setting you want to change (Bass, Treble,
Balance and Fade), rotate the Audio control
knob to set the desired setting. For the other
setting methods, see “How to use SETTING
button” (P.4-11).

This vehicle has some sound effect functions as
follows:
. Speed Sensitive Vol.
For more details, see “How to use SETTING
button” (P.4-11).

Switching the display:

Pushing the DISC·AUX button will switch the
displays as follows:

iPod

Š

/USB

? CD/DVD ? Bluetooth

Š

Audio

?

AUX

? iPod

Š

/USB

FM-AM-SAT radio operation

radio (FM/AM) band select:

Pushing the radio band select button will
change the band as follows:

AM

? FM1 ? FM2 ? AM

radio (SAT) band select:

Pushing the radio band select button will
change the band as follows:

XM1

? XM2 ? XM3 ? XM1

When the radio band select button is pushed
while the ignition switch is in the ACC or ON
position, the radio will come on at the channel
last played.

The last channel played will also come on when
the ON·OFF button is pushed to ON.

The satellite radio is not available in Alaska,
Hawaii and Guam.

If another audio source is playing when the radio
band select button is turned to ON, the audio
source will automatically be turned off and the
last radio channel played will come on.

When the stereo broadcast signal is weak, the
radio will automatically change from stereo to
monaural reception.

Advertising
This manual is related to the following products: