NISSAN 2014 Cube - Owner's Manual - Manual (Page 122)

Setting hazard indicator and horn mode
This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.
In hazard indicator and horn mode, when the
LOCK
button
*
1 is pushed, the hazard
indicator flashes twice and the horn chirps once.
When the UNLOCK
button
*
2 is pushed,
the hazard indicator flashes once.
If the horn chirp is not necessary, you can switch
to hazard indicator only mode by following the
switching procedure.
In hazard indicator only mode, when the LOCK
button is pushed, the hazard indicator
flashes twice. When the UNLOCK button is
pushed, neither the hazard indicator nor the horn
operates.
Mode (Pushing the or button) DOOR LOCK DOOR UNLOCK
Hazard indicator and horn mode
HAZARD - twice
HORN - once HAZARD - once
HORN - none
Hazard indicator mode HAZARD - twice HAZARD - none
Switching procedure:
To switch the hazard indicator and horn opera-
tion, push the LOCK
*
1 and UNLOCK
*
2 buttons on the keyfob simultaneously
for more than 2 seconds.
. When the hazard indicator mode is set, the
hazard indicator flashes 3 times.
. When the hazard indicator and horn mode is
set, the hazard indicator flashes once and
the horn chirps once.
Pre-driving checks and adjustments 3-9
Setting hazard indicator and horn mode
This vehicle is set in hazard indicator and horn
mode when you first receive the vehicle.
In hazard indicator and horn mode, when the
LOCK
button
*
1 is pushed, the hazard
indicator flashes twice and the horn chirps once.
When the UNLOCK
button
*
2 is pushed,
the hazard indicator flashes once.
If the horn chirp is not necessary, you can switch
to hazard indicator only mode by following the
switching procedure.
In hazard indicator only mode, when the LOCK
button is pushed, the hazard indicator
flashes twice. When the UNLOCK button is
pushed, neither the hazard indicator nor the horn
operates.
Mode (Pushing the or button) DOOR LOCK DOOR UNLOCK
Hazard indicator and horn mode
HAZARD - twice
HORN - once HAZARD - once
HORN - none
Hazard indicator mode HAZARD - twice HAZARD - none
Switching procedure:
To switch the hazard indicator and horn opera-
tion, push the LOCK
*
1 and UNLOCK
*
2 buttons on the keyfob simultaneously
for more than 2 seconds.
. When the hazard indicator mode is set, the
hazard indicator flashes 3 times.
. When the hazard indicator and horn mode is
set, the hazard indicator flashes once and
the horn chirps once.
Pre-driving checks and adjustments 3-9