Rearview monitor (if so equipped) -9, Warning – NISSAN 2014 Cube - Owner's Manual User Manual

Page 150

Advertising
background image

(such as the

button) is pressed and held for

two seconds.

Reset all settings/memory:

Select the “Reset All Settings/Memory” key to
return all settings to default and to clear the
memory.

Traffic Info setup

Refer to the separate Navigation System Own-
er’s Manual for information regarding this item.

When the shift lever is shifted into the R
(Reverse) position, the monitor display shows
the view to the rear of the vehicle.

The system is designed as an aid to the driver in
situations such as slot parking or parallel
parking.

WARNING

Failure to follow the warnings and
instructions for proper use of the Rear-
View Monitor could result in serious
injury or death.

. The RearView monitor is a conve-

nience but it is not a substitute for
proper backing. Always turn and
look out the windows, and check
mirrors to be sure that it is safe to
move before operating the vehicle.
Always back up slowly.

. The system is designed as an aid to

the driver in showing large station-
ary objects directly behind the vehi-
cle, to help avoid damaging the
vehicle.

. The system cannot completely elim-

inate blind spots and may not show
every object.

. Underneath the bumper and the

corner areas of the bumper cannot
be viewed on the RearView Monitor
because of its monitoring range
limitation. The system will not show
small objects below the bumper,
and may not show objects close to
the bumper or on the ground.

. Objects viewed in the RearView

Monitor differ from actual distance
because a wide-angle lens is used.

. Objects in the RearView Monitor

will appear visually opposite than
when viewed in the rear view and
outside mirrors

. Make sure that the back door is

securely closed when backing up.

. Do not put anything on the rear view

camera.

. When washing the vehicle with

high-pressure water, be sure not to
spray it around the camera. Other-
wise, water may enter the camera
unit causing water condensation on
the lens, a malfunction, fire or an
electric shock.

. Do not strike the camera. It is a

precision instrument. Otherwise, it

Center display, heater, air conditioner, audio and phone systems

4-9

REARVIEW MONITOR (if so
equipped)

(such as the

button) is pressed and held for

two seconds.

Reset all settings/memory:

Select the “Reset All Settings/Memory” key to
return all settings to default and to clear the
memory.

Traffic Info setup

Refer to the separate Navigation System Own-
er’s Manual for information regarding this item.

When the shift lever is shifted into the R
(Reverse) position, the monitor display shows
the view to the rear of the vehicle.

The system is designed as an aid to the driver in
situations such as slot parking or parallel
parking.

WARNING

Failure to follow the warnings and
instructions for proper use of the Rear-
View Monitor could result in serious
injury or death.

. The RearView monitor is a conve-

nience but it is not a substitute for
proper backing. Always turn and
look out the windows, and check
mirrors to be sure that it is safe to
move before operating the vehicle.
Always back up slowly.

. The system is designed as an aid to

the driver in showing large station-
ary objects directly behind the vehi-
cle, to help avoid damaging the
vehicle.

. The system cannot completely elim-

inate blind spots and may not show
every object.

. Underneath the bumper and the

corner areas of the bumper cannot
be viewed on the RearView Monitor
because of its monitoring range
limitation. The system will not show
small objects below the bumper,
and may not show objects close to
the bumper or on the ground.

. Objects viewed in the RearView

Monitor differ from actual distance
because a wide-angle lens is used.

. Objects in the RearView Monitor

will appear visually opposite than
when viewed in the rear view and
outside mirrors

. Make sure that the back door is

securely closed when backing up.

. Do not put anything on the rear view

camera.

. When washing the vehicle with

high-pressure water, be sure not to
spray it around the camera. Other-
wise, water may enter the camera
unit causing water condensation on
the lens, a malfunction, fire or an
electric shock.

. Do not strike the camera. It is a

precision instrument. Otherwise, it

Center display, heater, air conditioner, audio and phone systems

4-9

REARVIEW MONITOR (if so
equipped)

Advertising