NISSAN 2014 Cube - Owner's Manual - Manual (Page 159)

4-18 Center display, heater, air conditioner, audio and phone systems
SAA2346
1 Front defroster button
2 Display
3 Rear window defroster button (See “Rear
window defroster switch” (P.2-24).)
4 AUTO button
5 Temperature control , button
6 Fan speed control , button
7 OFF button
8 MODE button
9 Air recirculation button
10 Outside air circulation button
11 A/C (Air Conditioner) button
AUTOMATIC AIR CONDITIONER
Automatic operation (AUTO)
The AUTO mode may be used year-round as the
system automatically controls constant tempera-
ture, air flow distribution and fan speed.
To turn off the heater and air conditioner, push
the OFF button.
Cooling and dehumidified heating:
1. Push the AUTO button. (The AUTO indicator
will be displayed.)
2. If the A/C indicator light does not illuminate,
push the A/C button. (The A/C indicator
light will illuminate.)
3. Push the temperature control ,
button to set the desired temperature. The
temperature range is between 60
8F (188C)
and 90 8F (328C).
4. To set the automatic control mode, perform
one of the following operations.
. When the outside air circulation mode is
on, push and hold the outside air
circulation
button for more than 1.5
seconds.
. When the air recirculation mode is on,
push and hold the air recirculation
button for more than 1.5 seconds.
When setting the automatic control mode,
both indicator lights will blink twice indicat-
ing that the system is in the automatic
control mode.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C off):
1. Push the AUTO button. (The AUTO indicator
will be displayed.)
2. If the A/C indicator light illuminates, push the
A/C button. (The A/C indicator light will turn
off.)
4-18 Center display, heater, air conditioner, audio and phone systems
SAA2346
1 Front defroster button
2 Display
3 Rear window defroster button (See “Rear
window defroster switch” (P.2-24).)
4 AUTO button
5 Temperature control , button
6 Fan speed control , button
7 OFF button
8 MODE button
9 Air recirculation button
10 Outside air circulation button
11 A/C (Air Conditioner) button
AUTOMATIC AIR CONDITIONER
Automatic operation (AUTO)
The AUTO mode may be used year-round as the
system automatically controls constant tempera-
ture, air flow distribution and fan speed.
To turn off the heater and air conditioner, push
the OFF button.
Cooling and dehumidified heating:
1. Push the AUTO button. (The AUTO indicator
will be displayed.)
2. If the A/C indicator light does not illuminate,
push the A/C button. (The A/C indicator
light will illuminate.)
3. Push the temperature control ,
button to set the desired temperature. The
temperature range is between 60
8F (188C)
and 90
8F (328C).
4. To set the automatic control mode, perform
one of the following operations.
. When the outside air circulation mode is
on, push and hold the outside air
circulation
button for more than 1.5
seconds.
. When the air recirculation mode is on,
push and hold the air recirculation
button for more than 1.5 seconds.
When setting the automatic control mode,
both indicator lights will blink twice indicat-
ing that the system is in the automatic
control mode.
A visible mist may be seen coming from the
ventilators in hot, humid conditions as the air is
cooled rapidly. This does not indicate a mal-
function.
Heating (A/C off):
1. Push the AUTO button. (The AUTO indicator
will be displayed.)
2. If the A/C indicator light illuminates, push the
A/C button. (The A/C indicator light will turn
off.)