Windshield wiper and washer switch -26, Switch operation -26 – NISSAN 2014 Frontier - Owner's Manual User Manual

Page 129

Advertising
background image

For Canada:

This device complies with RSS-210 of In-
dustry Canada. Operation is subject to the
following two conditions; (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation of the device.

Security indicator light

The security indicator light blinks whenever the
ignition switch is placed in the LOCK, OFF or ACC
position. This function indicates the NISSAN Ve-
hicle Immobilizer System is operational.

If the NISSAN Vehicle Immobilizer System is mal-
functioning, the light will remain on while the
ignition switch is placed in the ON position.

If the light still remains on and/or the en-
gine will not start, see a NISSAN dealer for
NISSAN Vehicle Immobilizer System ser-
vice as soon as possible. Please bring all
registered keys that you have when visiting
your NISSAN dealer for service.

SWITCH OPERATION

The windshield wiper and washer operates when
the ignition switch is placed in the ON position.

Push the lever down to operate the wiper at the
following speed:

1

Intermittent (INT) — intermittent operation
can be adjusted by turning the knob toward

A

(Slower) or

B

(Faster).

2

Low (LO) — continuous low speed operation

3

High (HI) — continuous high speed opera-
tion

LIC0474

WIC0854

WINDSHIELD WIPER AND WASHER
SWITCH

2-26

Instruments and controls

Advertising