NISSAN 2014 Frontier - Owner's Manual - Manual (Page 81)

Before securing the child restraint with the
LATCH lower anchors (rear outboard seating po-
sitions only [crew cab models only] ) or the seat
belt, as applicable, follow these steps.
1. If necessary, raise or remove the head
restraint/headrest to position the top tether
strap
᭺
1 over the top of the seatback. If the
head restraint/headrest is removed, store it
in a secure place. Be sure to reinstall the
head restraint/headrest when the child re-
straint
is removed. See “Head
restraint/headrest” in this section for
head restraint/headrest adjustment,
removal and installation information.
2. Position the top tether strap over the top of
the seatback and under the head
restraint/headrest.
3. Secure the tether strap
᭺
2 to the tether
anchor point
᭺
3 on the seat directly behind
the child restraint.
4. Return the seatback to the locked position.
5. Refer back to child restraint installation
steps before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
BOOSTER SEATS
Precautions on booster seats
WARNING
If a booster seat and seat belt are not used
properly, the risk of a child being injured in
a
sudden stop or collision greatly
increases:
– Make sure the shoulder portion of
the belt is away from the child’s face
and neck and the lap portion of the
belt does not cross the stomach.
– Make sure the shoulder belt is not
behind the child or under the child’s
arm.
– A booster seat must only be installed
in a seating position that has a
lap/shoulder belt.
Rear bench seat (Crew cab models only)
LRS0576
1-60 Safety—Seats, seat belts and supplemental restraint system