NISSAN 2014 Frontier - Owner's Manual User Manual
Page 52
● On the floor between the jump seat belt
buckles in the center of the vehicle (King cab
only) as shown.
The anchor point
᭺
3
is located on the floor be-
tween the jump seat belt buckles in the center of
the vehicle. The routing bracket
᭺
2
is located
behind the cover plate
᭺
1
under the rear window
above the jump seat.
REAR-FACING CHILD RESTRAINT
INSTALLATION USING LATCH (Crew
cab models only)
Refer to all Warnings and Cautions in the “Child
Safety” and “Child Restraint” sections before in-
stalling a child restraint.
Follow these steps to install a rear-facing child
restraint in the 2nd row seats using the LATCH
system:
1. Position the child restraint on the seat. Al-
ways follow the child restraint manufactur-
er’s instructions.
2. Secure the child restraint anchor attach-
ments to the LATCH lower anchors. Check
to make sure the LATCH attachment is prop-
erly attached to the lower anchors.
Jump seats
(King cab models - passenger side shown)
LRS2101
Rear-facing web-mounted – step 2
WRS0801
Safety—Seats, seat belts and supplemental restraint system
1-31