NISSAN 2014 Frontier - Owner's Manual User Manual
Page 79
INSTALLING TOP TETHER STRAP
(Front passenger seat – King cab
models only)
WARNING
Child restraint anchorages are designed
to withstand only those loads imposed by
correctly fitted child restraints. Under no
circumstances are they to be used to at-
tach adult seat belts or other items or
equipment to the vehicle. Doing so could
damage the child restraint anchorages.
The child restraint will not be properly
installed using the damaged anchorages,
and a child could be seriously injured or
killed in a collision.
Before securing the child restraint with the seat
belt,
1. If necessary, raise or remove the head
restraint/headrest to position the top tether
strap
᭺
1
over the top of the seatback. If the
head restraint/headrest is removed, store it
in a secure place. Be sure to reinstall the
head restraint/headrest when the child re-
straint
is
removed.
See
“Head
restraint/headrest ” in this section for
head restraint/headrest adjustment,
removal and installation information.
2. Route the top tether strap
᭺
1
between the
head restraint/headrest and the top of the
seatback.
3. Secure the tether strap to the tether anchor
point
᭺
2
on the seatback.
4. Refer back to child restraint installation
steps before tightening the tether strap.
If you have any questions when installing a
top tether strap, consult your NISSAN
dealer for details.
Front passenger seat (King cab models only)
LRS0572
1-58
Safety—Seats, seat belts and supplemental restraint system