Changing engine coolant -12, Engine oil -12, Checking engine oil level -12 – NISSAN 2014 GT R - Owner's Manual User Manual

Page 283

Advertising
background image

8-12

Maintenance and do-it-yourself

CHANGING ENGINE COOLANT

If major cooling system repairs are required,
contact a GT-R certified NISSAN dealer. The
service procedures can be found in the appro-
priate NISSAN Service Manual.

Improper servicing can result in reduced
heater performance and engine overheat-
ing.

WARNING

. To avoid the danger of being

scalded, never change the coolant
when the engine is hot.

. Never remove the radiator filler cap

and the coolant reservoir cap when
the engine is hot. Serious burns
could be caused by high pressure
fluid escaping from the radiator and
reservoir.

. Avoid direct skin contact with used

coolant. If skin contact is made,
wash thoroughly with soap or hand
cleaner as soon as possible.

. Keep coolant out of reach of chil-

dren and pets.

Engine coolant must be disposed of properly.
Check your local regulations.

CHECKING ENGINE OIL LEVEL

1. Park the vehicle on a level surface and apply

the parking brake.

2. Run the engine until it reaches operating

temperature.

3. Turn off the engine. Wait at least 5

minutes for the oil to drain back into
the oil pan before checking the oil.

4. Remove the dipstick and wipe it clean.

Reinsert it all the way.

5. Remove the dipstick again and check the oil

level. It should be within the range

*

1

. If the

oil level is below

*

2

, remove the oil filler cap

ENGINE OIL

Advertising