How to switch the modes -25 – NISSAN 2015 GT R - Owner's Manual User Manual
Page 222
The control of the dual clutch transmission,
Bilstein DampTronic
electronically controlled
shock absorbers and Vehicle Dynamic Control
(VDC) can be changed to the desired modes by
operating the setup switches. Select the desired
mode best suited to the driving conditions.
NOTE:
Bilstein DampTronic
is a registered trade-
mark of ThyssenKrupp Bilstein Suspen-
sion GmbH.
1.
Transmission setup switch
2.
Suspension setup switch
3.
Vehicle Dynamic Control (VDC) setup switch
HOW TO SWITCH THE MODES
Each time the engine is started, all switches are
set to the normal mode. The normal mode is
recommended for normal driving. Move the
VDC, transmission and suspension setup
switches up or down to change the mode when
the engine is running.
Starting and driving
5-25
VDC, TRANSMISSION AND
SUSPENSION SETUP SWITCHES