Corrosion protection -9 – NISSAN 2015 GT R - Owner's Manual User Manual

Page 274

Advertising
background image

WARNING

Do not allow wet seat belts to roll up in
the retractor. NEVER use bleach, dye, or
chemical solvents to clean the seat
belts, since these materials may se-
verely weaken the seat belt webbing.

Cleaning the power window finisher

Moisten a soft cloth with neutral detergent and
wipe off the dirt on the power window finisher

*

1

.

After wiping off the dirt, soak a cloth with water
and wring it out thoroughly, then wipe off the
neutral detergent.

NOTICE

Some cleaners may cause the paint to
peel or cause spots to occur. If using a
cleaner, consult with a GT-R certified
NISSAN dealer.

MOST COMMON FACTORS CON-
TRIBUTING TO VEHICLE CORRO-
SION

.

The accumulation of moisture-retaining dirt
and debris in body panel sections, cavities,
and other areas.

.

Damage to paint and other protective coat-
ings caused by gravel and stone chips or
minor traffic accidents.

ENVIRONMENTAL FACTORS IN-
FLUENCE THE RATE OF CORRO-
SION

Moisture

Accumulation of sand, dirt and water on the
vehicle body underside can accelerate corro-
sion. Wet floor coverings will not dry completely
inside the vehicle, and should be removed for
drying to avoid floor panel corrosion.

Relative humidity

Corrosion will be accelerated in areas of high
relative humidity, especially those areas where
the temperatures stay above freezing where
atmospheric pollution exists, or where road salt
is used.

Appearance and care

7-9

CORROSION PROTECTION

Advertising